Clavia Nord C2 Manual de usuario descargar pdf (Pagina 7)

Bass Pedal

To play the Nord C2 Combo Organ’s dedicated bass registers, connect

the MIDI Out from your external controller (preferably a bass pedal-

board) to the Bass Pedal connector. The bass registers will respond to

all MIDI note messages received regardless of their MIDI channel.

Audio connections

Monitor In

Use this to connect and monitor a signal from an mp3 or a CD player

at the Nord C2's headphone output. This allows you to e.g. rehearse

with the C2 to pre-recorded music.

M Signals connected to this input will not be processed with the

Nord C2's effects or appear at the left and right output jacks.

Main stereo output - Left & Right

The left and right line level outputs from the Nord C2 are unbalanced.

Use the ¼" connectors to connect the Nord C2 to an ampliﬁer or

recording equipment.

General guide on audio connections:

• Make all the connections before you turn on the power to your ampliﬁer.

• Turn on the power to your ampliﬁer last.

• Turn off the power to your ampliﬁer ﬁrst.

Headphone output

This is where you connect a ¼" stereo connector from a pair of head-

phones.

E Playing at a high volume level can result in hearing impairments

such as permanent hearing loss.

Rotary Speaker

The rotary speaker high level outputs consist of a ¼" and a 11-pin

Leslie™ standard connector. The high level out are 14V RMS high level,

unbalanced, and are only intended to be used, directly connected to

a rotary speaker cabinet with built in ampliﬁer. Any other form of use

might result in damaged equipment.

It is possible to route the tonewheel organ to the High Level and 11-pin

outputs and the other organs to the main outputs. Other combinations

are also possible. Read more about this on page 17.

Chapter 3 CoNNeCtioNs | 7

1 2 3 4 5 6 7 8 9 10 11 12 ... 24 25

Sin comentarios

Clavia Nord C2 Manual de usuario Pagina 7